How to repair heating element?

 

Firstly, How to repair a boiler?

Today the water heater can be found in most homes and apartments. As with any other type of technology, electric heating tanks sometimes fail due to improper service. Repairing the boiler using hands is not a big deal, if the time to fix the error is correct, immediately draw attention to the fact that the manual is suitable for most models of such well-known companies as Ariston, Burn, THERMEX, Electrolux, etc.

The main cause causes the failure

The damage caused to the boiler is considered due to the poor quality of water. Because of this, surface heating element is formed on the scale and internal walls of the corrosion tank, which leads to more serious and costly repairs in the service center. In addition, the boiler may stop working due to the connections and rings of water Hot / Cold Electric are not correct.
Regarding the latter, when the boiler is necessary to establish a link between the tube out of the tank and the mother water supply valve.

How to remove depositions

If the boiler does not heat the water to the required temperature, but still makes noise when it turns on, so as to form a scum PETN, which is necessary to clean. Don’t make it difficult, you just need to turn off the equipment of pipes, drain water from the tank and disassemble to remove the heating element. In the plug detachment of the socket difficulties will not arise, but the water can drain the repairs a little complexity.

How to repair a heater?

This device can be used as an additional electric heating for the home and garden. If the system cannot handle any more do not include central heating in the apartment, such heaters can be risky. But what if after summer the heater does not turn on any blows but does not heat? This situation, it is possible to try to repair, it is not really too difficult. Moreover, there are more common causes of failure and how to repair it by yourself easily.

If the heater Does not respond when running

If no equipment is connected to the network and you press the button, there may be several reasons for failure. The first thing to do – Check the power cord, it is possible in the summer store that it was killed somewhere. Take the screwdriver and multimeter, then initiate the repair heater Most probably the cause of failure is the fuse box, one of which works in the case of high temperature.

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.